 |
MIM-B11
Mimosa Networks B11, 11.7 GHz Gigabit Backhaul Radio. The B11 is fiber-ready - simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you are not quite ready for fiber, the B11 also comes with a standard Gigabit Power-over-Ethernet connection. Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY), 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets. 4x4:4 MIMO OFDM up to 256QAM. Outdoor UV stabilized plastic Aluminum mounting panel. Antenna Connection Direct connect to circular dual polarized antenna. Dimension Height: 260 mm Width: 158 mm Depth: 70 mm |
Morate se prijaviti
|
 |
 |
MXL-JRMD-400-10-11
Jirous Parabolic antenna JRMD-400-10/11.Jirous Parabolic antenna JRMD-400-10/11.
Antenna JRMD-400-10/11 is designed for microwave links at the frequency band 10 and 11 GHz. Frequency range 10.0 - 12 GHz. Low band gain 29 dBi, High band gain 30 dBi. Beamwidth 3 - 4,6 degrees. Class 2. UV steady plastic ABS. Mast installation 40-120 mm |
Morate se prijaviti
|
|
 |
MXL-JRMD-680-10-11
Jirous Parabolic antenna JRMD-680-10/11.
Antenna JRMD-680-10/11 is designed for microwave links at the frequency band 10 and 11 GHz. Frequency range 10.0 - 12 GHz. Low band gain 33,6 dBi, High band gain 35,5 dBi. Beamwidth 3 - 5 degrees. Class 2. UV steady plastic ABS. Mast installation 40-120 mm |
Morate se prijaviti
|
|
 |
UBQ-AF-11
Ubiquiti Networks AF-11, airFiber 11, 1.2Gbps+ Full-Duplex Licensed 11GHz Radio System. Range 300+ km. Includes radio + Gigabit PoE (50V, 1.2A) power injector. |
Morate se prijaviti
|
|
 |
UBQ-AF11-CA
Ubiquiti Networks AF11-CA, cables/quick-mount for AF-11FX. The AF11-CA is a kit for 3rd-party manufacturer of antennas consisting of a plastic holder (for AF-11FX unit) and two pigtails specially adapted for 11GHz. These pigtails are 23cm long and having N-male-N-male connectors. |
Morate se prijaviti
|
|
 |
UBQ-AF11-COMPLETE-LB
Ubiquiti AF11-Complete-LB, airFiber 11, low band. Full duplex point-to-point radio, 11 GHz frequency operation, up to 1.2+ Gbps throughput. Includes one low-band duplexer for SISO mode (MIMO mode requires an optional second duplexer. Integrates with AF-11G35 11 GHz antenna. Supports separate TX/RX frequencies |
Morate se prijaviti
|
|
 |
UBQ-AF-11-DUP-H
Ubiquiti Networks AF-11F-DUP-H, frequency duplexer for 2x2 MIMO usage with airFiber 11FX-H unit. Duplexer operates in the frequency band 11.440 - 11.700GHz (high channel). A single duplexer operates in SISO mode, while adding a second duplexer allows the AF-11 to operate in MIMO mode. |
Morate se prijaviti
|
|
 |
UBQ-AF-11-DUP-L
Ubiquiti Networks AF-11-DUP-L, a frequency duplexer for 2x2 MIMO usage with airFiber 11FX-L unit. Duplexer operates in the frequency band 10.700 - 10955MHz (low channel) a 11.200 - 11.445GHz (high channel). |
Morate se prijaviti
|
|
 |
UBQ-AF-11FX-DUP-H
Ubiquiti Networks AF-11FX-DUP-H, frequency duplexer for 2x2 MIMO usage with airFiber 11FX-H unit. Duplexer operates in the frequency band 11.440 - 11.700GHz (high channel).
|
Morate se prijaviti
|
|
 |
UBQ-AF-11FX-DUP-L
Ubiquiti Networks AF-11FX-DUP-L, a frequency duplexer for 2x2 MIMO usage with airFiber 11FX-L unit. Duplexer operates in the frequency band 10.700 - 10955MHz (low channel) a 11.200 - 11.445GHz (high channel). |
Morate se prijaviti
|
|
 |
UBQ-AF-11G35
Ubiquiti AF-11G35, parabolic antenna for airFiber 11GHz, 35dBi. designed
for use in the licensed 11 GHz band. pairing the airFiber
AF-11G35 antenna with the airFiber
AF-11FX radio (available separately),
to create the endpoint of an 11 GHz
high-performance, full-duplex,
Point-to-Point bridge or network backhaul. dish antena has 35dBi gain, excellent isolation between connectors (up to 35dB), very small beam angle 2.5° (at -3dB), mounting kit for AF-11X unit on back side and is designed for 11GHz licensed band (10 300-11 700MHz). The antenna is a 2x2 MIMO and also allow 2x2 MIMO slant (rotated 45°) installation. For better performance during bad weather is equipped with radome and cover for AF-11X unit. |
Morate se prijaviti
|
|