 |
NFO-TOOL-80010
NFO Three-arm cable stocking for cables with a diameter of 8-15mm, length 50cm - Used for tightening cables with a diameter of 8-15mm | The product is made of stainless steel. The stocking is self-clamping, requires no assembly tools and is easy to put on/remove from the cable. Thanks to three arms, you can pull three cables at the same time. |
Morate se prijaviti
|
 |
 |
NFO-TOOL-80011
NFO Three-arm cable stocking for cables with a diameter of 5-10mm, length 45cm - Used for tightening cables with a diameter of 5-10mm | The product is made of stainless steel. The stocking is self-clamping, requires no assembly tools and is easy to put on/remove from the cable. Thanks to three arms, you can pull three cables at the same time. |
Morate se prijaviti
|
|
 |
NFO-TOOL-80012
NFO Two-arm cable stocking for cables with a diameter of 8-15mm, length 50cm - Used for tightening cables with a diameter of 8-15mm | The stocking is self-clamping, requires no assembly tools and is easy to put on/remove from the cable. |
Morate se prijaviti
|
|
 |
NFO-TOOL-80015
NFO Eyelet tip for a fiberglass pilot with a diameter of 6 mm - enabling the installation of cables to be pulled through. You will need epoxy glue to install the tip onto the fiber. |
Morate se prijaviti
|
|
 |
NFO-TOOL-80016
NFO Cable roll 80mm - designed for hanging overhead cables. The roller wheel is made of aluminum and is mounted on a closed ball bearing, which prevents dirt and sand from entering during operation. The remaining elements of the roller are made of steel parts. The roller is designed for installation on poles and supporting structures. The upper, opening part of the roller makes it easier to place the cable on the wheel with bearings |
Material thickness: 3.69mm |
Total dimensions: 80mm x 70mm x 260mm |
External dimensions. hook: 15mm x 70mm x 89mm |
Inner diameter. hook: 24.70mm |
Shaft dimensions: 40mm x 182mm |
Roll dimensions: 80mm x 34mm |
Internal diameter of the cable roll: 22.80mm |
Weight: 1 kg |
Load capacity: 5kN |
Morate se prijaviti
|
|
 |
NFO-TOOL-80017
NFO Corner roller for optical cable - used for laying cables on cable routes in trenches. They are used on turns and curves of routes, and are necessary for right-angle turns. The roller body is made of polyamide and the frame is made of powder-coated steel | The roll allows you to lay cables with a diameter of up to 120 mm | reduces the pulling force and prevents the cable from breaking at an inappropriate angle | Weight: 8.0kg | Load capacity: 300kg |
Morate se prijaviti
|
|
 |
NFO-TOOL-80018
NFO Fiberglass (FRP) remote control for pulling cables, 6mm, 200m, yellow - placed on a special stand to facilitate its unwinding. Fiber with high elasticity and resistance to bending and tearing, covered with yellow PE plastic that has a protective function and ensures good sliding properties. Blue powder-coated fiber frame and a special "eye" for fiber guidance. The stand's design ensures functional transport, storage and use. The end of the fiber ends with a guide head | Application:
- Pulling cables between telecommunication manholes; Pushing cables under roads; Installations in suspended ceilings; Cleaning and unblocking pipes, culverts, sewage systems; Inserting cables into protective pipes
|
Technical data: Dimensions: 55x20x70 cm | Outer diameter (with cover): 6 mm | Length: 200 m | Weight (with frame): approx. 9 kg |
Morate se prijaviti
|
|
 |
NFO-TOOL-80035
NFO Heat-shrinking sleeve, diameter 50mm, length 14,2cm - Used to protect and seal I / O on fiber optic cable, but also to stiffen the cable inserted in the holes in the splice closures | Shrink ratio: 2: 1 to 3: 1 |
Morate se prijaviti
|
|
 |
NFO-TOOL-80036
NFO Heat-shrinking sleeve, diameter 40mm, length 14,2cm - Used to protect and seal I / O on fiber optic cable, but also to stiffen the cable inserted in the holes in the splice closures | Shrink ratio: 2: 1 to 3: 1 |
Morate se prijaviti
|
|
 |
NFO-TOOL-80037
NFO Heat-shrinking sleeve, diameter 30mm, length 14,2cm - Used to protect and seal I / O on fiber optic cable, but also to stiffen the cable inserted in the holes in the splice closures | Shrink ratio: 2: 1 to 3: 1 |
Morate se prijaviti
|
|